Products
Blenders
Gravimetric
Accurate weighting and reliable discharge
Volumetric
Ideal for simple mixing of crushed materials
Gravimetric synchronized feeder
Weigh the material at the load cell and mix. The weighing error due to the material's shape and size is small, and weighing is more reliable than the capacity measuring type.
Chiller
Water Cooled
Used for temperature control in the lower temperature range (45 - 86°F / 7 - 30°C).
Dryers
Dehumidifying Dryers [Challenger]
Heat the moisture in the air with the moisture absorbent, heat it, and send it to the drying hopper to dry the resin pellet. Hot air Dryer Dry resin pellets to low moisture even in highly humid plastic enclosures, super engineering plastics, and other resins that cannot be completely dried (hydrated inside the resin).
Mixers
High speed floating
Mold temperature controllers
Oil Medium Temperature Controllers
Used for temperature control of a relatively high temperature zone. (140°F / 60°C or 176°F / 80 °C to the maximum temperature 320°F / 160°C to 608°F / 320°C)
Water Medium Temperature Controllers
Used for temperature control in a relatively low temperature zone. (Supply water temperature 50°F (10°C) to maximum temperature 203°F (95°C) to 356°F (180°C)
TW/95 series
JUSTTHERMO
Direct Cooling type (Max. 203°F / 95°C)
TW/95-L series
JUSTTHERMO
Direct Cooling type, Low Pressure Type (Max. 203°F / 95°C)
TW/120 series
JUSTTHERMO
Direct Cooling type, High Pressure Type (Max. 248°F / 120°C)
TW/160, 180 series
JUSTTHERMO
Direct Cooling type (Max. 320°F / 160°C) <br>High Pressure type (Max. 356°F / 180°C)
TWK series
JUSTTHERMO
Direct Cooling type
Mold temperature controllers (built-in chiller)
Water medium cold temperature controller
Powder machinery
Feeder
Various supply methods can be selected depending on the application
